2026/6/26 · 8:15

June 26 China Sourcing Check: Rollers Repriced, Handles Split by MOQ, LME Aluminium Slides to $3,148

A buyer-focused price check across Chinese aluminium window and door hardware suppliers, covering roller, handle, friction-stay and profile quote tiers, MOQ breaks, Alibaba-side Accio signals, and the June 24 LME aluminium drop to USD 3,148/t.

Aluminium Window & Door Accessories — China Supplier & Market Daily @Muhammad Waseem

Data cut-off and coverage note

Data cut-off: 26 June 2026, 08:00 GMT+8. The supplier table below uses pages that were readable at item or supplier level during this issue's collection window. Direct Alibaba product-detail pages encountered human-verification gates, so this issue uses Accio's Alibaba-side product index for handle-listing signals and Made-in-China pages for item-level pricing. Treat the Alibaba-side rows as discovery signals, not final purchase quotations.

Procurement signal in one minute

The most actionable movement is not a new headline tariff; it is the gap between hardware part pricing and aluminium input volatility. AL Circle reported that LME aluminium cash bid fell from USD 3,263/t on 23 June to USD 3,148/t on 24 June, a 3.52% day-on-day drop, while LME opening stocks slipped to 311,725 tonnes. 1 That gives buyers a short window to press for lower extrusion-linked profile quotes, but it does not automatically lower stainless-steel friction stays or nylon/POM roller assemblies.

For hardware categories, the accessible China supplier pages point to three buyer moves today:

Rollers: Foshan and Jiangxi listings still split sharply by construction, from USD 0.25-0.80/pc for a Jiangxi stainless/POM roller to USD 3.20-3.80/pc for a Foshan four-wheel sliding pulley.
Handles: Zhaoqing Keyi shows a clear volume break: USD 2.00/pc at 1,000-4,999 pieces and USD 0.99/pc at 5,000+ pieces.
Profiles: Foshan Hooke's accessible extrusion/profile rows are quoted by the tonne, around USD 3,300-3,357/t with a 1-ton minimum order, closer to aluminium-feedstock exposure than small hardware accessories.

Current supplier price and MOQ comparison

Category	Supplier / platform	Current quoted tier	MOQ / volume break	Buyer read-through	Source
Heavy-duty sliding roller	Jiangxi Jin Bai Cheng Hardware Products / Made-in-China	USD 0.25-0.80/pc	3,000 pcs	Low-to-mid roller benchmark; stainless-steel body with nylon/plastic/PP/POM wheel options, TUV/CE/ISO listed, 600,000 sets/month capacity.	2
OEM stainless sliding roller	Foshan Hanzson Building Materials / Made-in-China	USD 1.00-4.00/pc	300 pcs	Useful small-order benchmark for customized stainless rollers; lower MOQ than most Hanzson roller rows.	3
Plastic sliding window/door roller	Foshan Hanzson Building Materials / Made-in-China	USD 0.65-1.86/pc	3,000 pcs	Mid-volume plastic roller quote; buyer should specify wheel material and load rating before comparing to stainless/POM rows.	3
U-groove four-wheel sliding pulley	Foshan Hanzson Building Materials / Made-in-China	USD 3.20-3.80/pc	3,000 pcs	Premium roller row; likely only comparable with high-load assemblies, not single nylon rollers.	3
Aluminium alloy double-wheel roller	Foshan Hanzson Building Materials / Made-in-China	USD 2.20-2.80/pc	3,000 pcs	Aluminium-body roller benchmark; more exposed to aluminium input costs than plastic-body rows.	3
Aluminium casement handle	Zhaoqing Keyi Metal / Made-in-China	USD 2.00/pc at 1,000-4,999 pcs; USD 0.99/pc at 5,000+ pcs	1,000 pcs effective first tier	Strong volume discount; Keyi also lists OEM/ODM customization, ISO/CE and 100,000 pcs/month supply ability.	4
Aluminium / sliding door-window handle	Foshan Hooke Aluminium Products / Made-in-China	USD 0.80-0.90/pc	1,000 pcs	Low handle benchmark from a Foshan trading-company page; useful for RFQ comparison, but confirm finish, lock status and packaging.	5
European-style lock handle	Accio product index	USD 1.57/pc	1,000 pcs	Alibaba-side discovery signal from Ningbo Oulai; price is within the low-to-mid handle band, but verify on the seller page before ordering.	6
Multi-point aluminium handle	Accio product index	USD 2.00-2.50/pc	500 pcs	Foshan Longji row showed 43% reorder rate; attractive when reorder rate matters more than lowest unit price.	6
Casement friction stay	Zhaoqing Deweili Construction Hardware / Made-in-China	USD 0.20-0.90/pc	500 pcs	Keeps Zhaoqing friction stays in a budget-to-mid band; listing states stainless steel, 8-24 inch sizes, 50,000+ open-close test cycles, 20-25 working-day delivery.	7
Aluminium casement hinge / friction stay	Foshan Hooke Aluminium Products / Made-in-China	USD 0.80-0.90/pc	1,000 pcs	Foshan hinge/friction-stay benchmark sits near the upper half of the Deweili band; check whether OEM packaging and system matching justify the difference.	5
Aluminium extrusion / profile rows	Foshan Hooke Aluminium Products / Made-in-China	USD 3,300-3,357/t	1 ton	Best read as a profile/raw-material proxy rather than a small-accessory quote; should move faster with LME and billet premiums than handles or friction stays.	5

Category read-through

Rollers: small-order sampling is available, but the comparable unit is not uniform

Hanzson's 300-piece MOQ on the OEM stainless sliding roller gives buyers a route to sample customized roller assemblies without committing to a 3,000-piece carton. 3 The trade-off is that the quoted band is wide at USD 1.00-4.00/pc, so an RFQ should freeze wheel material, bearing, load rating, finish and packing before negotiating.

For budget benchmarking, the Jiangxi Jin Bai Cheng page is cleaner: USD 0.25-0.80/pc at 3,000 pieces, with TUV/CE/ISO and a stated 600,000 sets/month capacity. 2 That makes it the lower anchor for today's roller RFQs.

Handles: volume discounts are real; reorder-rate signals are worth asking about

Keyi's handle listing is the clearest MOQ-based discount found today: USD 2.00/pc at 1,000-4,999 pieces drops to USD 0.99/pc at 5,000+ pieces. 4 That is a 50.5% unit-price reduction at the larger tier, before freight, finish and packaging variables.

The Accio index adds a useful demand-quality signal: the Foshan Longji multi-point aluminium handle row shows USD 2.00-2.50/pc, 500-piece minimum order and 43% reorder rate. 6 Because Accio is an index page rather than a final seller contract page, buyers should use this as a shortlist trigger, then request the seller's current pro forma quote and test reports.

Friction stays: Zhaoqing remains the clean budget anchor

Deweili's Zhaoqing friction stay row keeps the category anchored at USD 0.20-0.90/pc with a 500-piece MOQ. 7 It also lists a 10-year warranty, stainless-steel material, 8-24 inch sizes, 3-5 day sample time and 20-25 working-day delivery. Those fields matter more than headline price when comparing SS201, SS304 and mixed-grade rows.

Profiles: today's aluminium slide should be used in negotiation, not assumed as an automatic discount

Hooke's accessible profile rows are quoted around USD 3,300-3,357/t with a 1-ton minimum order. 5 Against AL Circle's June 24 LME cash bid of USD 3,148/t, that suggests the quote includes processing, alloy/extrusion and supplier margin rather than a simple metal pass-through. 1 If you are ordering profile connectors or custom aluminium sections, ask suppliers to separate raw material, extrusion, finishing and packaging in the quotation.

EU/UK compliance watch

For EU buyers, CBAM remains a procurement checklist item for aluminium goods. Finnish Customs lists aluminium bars/profiles/tubes and aluminium structures under CBAM-covered goods, and states that importers can bring more than 50 tonnes of CBAM goods into the EU customs territory per calendar year only with authorised CBAM declarant status or a pending authorisation submitted by 31 March 2026. 8 The first annual declaration for 2026 imports is due by 30 September 2027. 8

Practical RFQ wording for EU buyers:

Ask suppliers to identify whether the quoted item falls under HS 7604, 7608, 7609, 7610 or 7616.
For profile-heavy orders, request embedded-emissions data and mill origin early, not after shipment booking.
For handles, friction stays and rollers, still request CE/EN-relevant test documentation where the part is safety-critical or part of a certified window system.

Today's buying stance

Push harder on profile-linked quotes. LME aluminium's drop to USD 3,148/t gives buyers leverage on tonne-priced profiles and aluminium-heavy rollers, but less on stainless friction stays.
Separate sample MOQ from production MOQ. Hanzson's 300-piece stainless roller row is suitable for qualification orders; most repeat production rows still sit around 3,000 pieces.
Do not compare handle prices without lock status. A USD 0.80-0.90 non-specified handle, a USD 0.99 high-volume casement handle and a USD 2.00-2.50 multi-point lock handle may all be rational prices for different specifications.
Use Accio reorder-rate rows as shortlist signals only. A 43% reorder rate is useful, but final sourcing should still be based on a current seller quote, samples, certification files and inspection terms.

Open gaps to recheck in the next issue

Direct Alibaba product-detail pages were not readable during the collection window; the Alibaba-side signal therefore comes through Accio's index page only.
No clean, current corner-cleat product-detail page with both price and MOQ was accessible; profile and extrusion rows are used as the closest aluminium-connector proxy.
Buyer reorder rate was visible in Accio rows, but not on Made-in-China item pages.